Boom R46/46 m
The Boom R46/46 m is the largest and most popular model in the series. It is suitable for the p2800I and larger machines. The Boom R46/46 m is suitable for tramline spacings from 27 m to 39 m and flow rates of 20–80 m³/h. Its section layout keeps the boom from extending too far forward. One-sided support is required for full unfolding. As standard, it is equipped with a heavy-duty 3-wheel frame and slewing ring, with a 4-wheel track frame available as an option. Centre sections and lifting devices in different widths are available for machines from other manufacturers. A suspension unit for the 3rd and 4th elements is included as standard. A swivel solution from the 2nd to the 1st element is available as an option for a 3 m transport width. The Boom R46/46 m provides gentle, low-pressure irrigation close to the ground, with precise water distribution and reduced drift. Perfect irrigation because:
less water consumption, with savings of 20–30% compared with a rain gun
less drift, with precise distribution through nozzles, rotators or sprays
lower pressure requirement, as the nozzles require only 1.4 bar
less crop damage, as the water is applied close to the ground
| Luxor 1″ geared end sprinkler, nozzles ∅ 9/10/12 mm | ||
| K1 Teso 8° 1″ end sprinkler, nozzles ∅ 9/10/12 mm | ||
| 180° rotator end nozzle | ||
| R 55 A rotator end nozzle | ||
| drag hoses |
The suspended spray heads enable highly targeted and gentle irrigation. They conserve resources and operate independently of wind conditions.
With drag hoses, the water is delivered directly to the plants below the leaf canopy.
Please fill out the form, and one of our managers will contact you.
Please fill out the form, and one of our managers will contact you.